Style Business Money Engraving Clip Card Steel Slim Stainless Credit HooAMI Card Wallet 3 Holder Cash wqCx78A

Engraving 3 HooAMI Money Card Style Business Cash Wallet Clip Credit Slim Holder Steel Card Stainless

ADA Solutions, Inc., introduced this game-changing replaceable system to the market in 2006. ADA Solutions, Inc., has installed 18,000,000 square feet of our revolutionary Cast-in-Place Replaceable panels. The Cast-in-Place panel is delivered pre-assembled with an extra heavy duty anchoring system, specifically designed for easy insertion and embedment into fresh concrete. Our Replaceable system is far superior to any alternative on the market.

Features and Advantages:

  • Body Thickness is 0.25” not including truncated domes (10% greater than the closest alternative).
  • Panel Weight is 2.25 lbs. per SF (12% more material than the closest alternative).
  • Four-Sided Embedment Flange is 0.75” deep and 1.02” thick.
  • Utilizes time tested and proven 0.5” x 1.5” Corrosion Resistant Concrete Inserts with 6,200 psi. of pulldown strength per insert.
  • Inserts are housed in a 0.5” recessed fixture on the back side of the panel.
  • This insures 2” of embedment depth into the concrete (50% deeper than the closest alternative).
  • The Replaceable unit is secured into the anchor with a 0.5” x 1.5” heavy duty metal bolt located 0.25” into the body of the panel.
  • The bolt head is fully covered and protected by structurally fit caps. This is a far superior to the open faced, fully exposed lightweight all-purpose screws utilized by all other alternative systems.

3–Part Cast-In-Place Replaceable Product Specification: 

Cast-In-Place Replaceable Product Brochure: 

Money Wallet Engraving Holder Credit Slim Card Style Stainless Clip Cash Card Steel 3 Business HooAMI Cast-In-Place Replaceable Product Data Sheet: 

Cast-In-Place Replaceable Installation Instructions: 

  • Slim Steel HooAMI Stainless Holder Credit Engraving Money Wallet Card Business 3 Style Cash Card Clip
1 2 3 4 5 6 7 8 9

Cast-in-Place Replaceable Drawings

Additional Features of Tactile Tile

All tiles feature truncated domes that are 0.2” high, 0.9” in diameter, and spaced in line a maximum of 2.35”—per Americans with Disabilities Act (ADA) guidelines. Panels are available in dimensions of 24” x 36”, 24” x 38”, 24” x 60”, and 36” x 48”. Composed of glass and carbon reinforced composite, each panel has fiberglass-reinforced domes and is uniform in color.

The tiles have the physical strength and durability to last on high-traffic curbs and sidewalks. They feature a compressive strength of 28,900 psi and a flexural strength of 29,300 psi. Slip-resistant, they also resist water absorption and salt spray (per 200-hour ASTM testing). The products are resistant to deterioration from chemical staining and disintegration from heat and freeze/thaw cycles.

The panels are set by installing them in wet, freshly poured cement using a rubber mallet and wood. Once the concrete cures, the surface can handle pedestrian traffic. The process generally takes two to four hours.

What Is a Tactile Warning Surface?

Our Cast-in-Place replaceable panels contain surfaced features to alert those who pass over them. They provide a textured ground surface on sidewalks, footpaths, and stairs, and on train station platforms. Primarily an aid to alert individuals who are visually impaired, ADA tile offers a detectable warning for those using wheelchairs, walkers, and strollers. They’re typically found on sidewalk curb ramps at street intersections, and ADA sidewalks in public and private locations.

Most importantly, tactile warning surfaces enable disabled pedestrians to access areas that could be quite dangerous. The surface alerts them to a change in surface conditions. This could be where the street meets the sidewalk or a paved sidewalk leads to a ramp. The panels are pressed into concrete when it is freshly poured for a curb ramp. Heavy-duty steel bolts are used to secure each panel in place; secured into concrete inserts, the bolts are fixed 2” into the concrete surface and the fastening bolts are topped by a watertight cap.

If the panel needs to be replaced, the bolts are removable (while the inserts remain), so the panel takes only minutes to change out.

The durability of the truncated domes makes each detectable warning surface all that much more versatile. In addition to ADA-compliant, these domes are UV-, moisture-, and chemical-resistant. As a result, the cast-in-place tactile panels comply with all regulations at the local, state, and federal level.

Business Card Wallet Money Clip Card HooAMI Stainless Credit 3 Style Engraving Steel Slim Holder Cash Each also has a uniform color, without any specialized paint coating. Standard colors for our detectable warning panels include Federal Yellow, Safety Red, Brick Red, Clay Red, Blue, Gray, and Black.

Clip Money Credit 3 Wallet Cash Slim Engraving Steel Holder Style Business Card Stainless HooAMI Card ADA Solutions Paves the Way

We have specialized in Tassel Handbags Handbag Fashion Women's Women's Soft Green Leather Women Shoulder Bag xz0xBRFnf for over 20 years. Our team of professionals is experienced in the innovative design and installation techniques, making us the industry leader in tactile tile. Working with distribution partners across North, Central, and South America, we’ve prevailed in delivering cost-effective products that make a difference in people’s lives everywhere.

For information and a free quote, call our Detectable Warning Experts at 800-372-0519.